Toshiba e-studio3511, e-studio4511 Manual page 207

[E] Drum thermistor
(1) Take off the drum (
(2) Remove 1 screw and disconnect 1 connector,
and then take off the drum thermistor with the
whole bracket.
(3) Remove 1 screw and take off the drum
thermistor.
[F] Discharge LED unit
(F-1) Discharge LED
(1) Take off the black developer unit and cleaner
unit ( Chapters 12.8 [A] and 11.7 [A]).
(2) Remove 2 screws and lift up the discharge LED
unit. Disconnect 2 connectors, then take off the
discharge LED unit.
(3) Remove the discharge LED.
November 2003 © TOSHIBA TEC
Chapter 11.7 [C]).
11 - 15
Connector
Fig. 11-722
Fig. 11-723
Discharge LED unit
Fig. 11-724
Discharge LED
Fig. 11-725
e-STUDIO3511/4511 DRUM RELATED SECTION
11