Toshiba e-studio3511, e-studio4511 Manual page 206

[D] Cleaner
(D-1) Drum cleaning blade
(1) Take off the main charger unit and drum.
( Chapter 11.7 (B-1) [C])
(2) Remove 3 screws and the cleaning blade.
Notes: 1. Do not touch or damage the edge of the
cleaning blade.
2. Check the color deviation after replacing
the drum cleaning blade.
(D-2) Recovery blade
(1) Remove the recovery blade.
Notes: 1. To attach the recovery blade, clean the
surface of the frame beforehand to make
sure not to deform the blade.
2. Attach the recovery blade while pushing
it to the step on the surface of the frame.
11
3. Press the stuck part with your finger to
attach the blade securely.
(D-3) Drum cleaner brush
(1) Unlock the lever by rotating it and pull it out.
(2) Remove the drum cleaner brush.
e-STUDIO3511/4511 DRUM RELATED SECTION
Cleaning blade
Fig. 11-718
Recovery blade
Fig. 11-719
Fig. 11-720
Fig. 11-721
11 - 14
04/10
Lever
November 2003 © TOSHIBA TEC