Toshiba e-studio3511, e-studio4511 Manual page 306
Multifunctional digital color systems
Hide thumbs
Also See for e-studio3511, e-studio4511:
- Service handbook (552 pages) ,
- Operator's manual (313 pages) ,
- Operator's manual (162 pages)
Table of Contents
Advertisement
(3) Disconnect 1 connector and take off the IH
control board cooling fan.
[O] Scraper
(1) Take off the fuser unit (
(2) Remove 2 screws and take off the jam access
cover.
(3) Remove 4 screws and take off the cover.
16
(4) Remove 2 screws and take off the scraper.
Notes: 1. Before installing or taking off the scraper,
confirm that the pressure releasing levers
are up.
2. Be careful not to scratch the fuser belt.
e-STUDIO3511/4511 FUSER UNIT/PAPER EXIT SECTION 16 - 28
Connector
Chapter 16.7 [A]).
04/01
IH control board
cooling fan
Fig. 16-749
Fig. 16-750
Fig. 16-751
Fig. 16-752
November 2003 © TOSHIBA TEC
Scraper
Advertisement
Table of Contents
