Toshiba e-studio3511, e-studio4511 Manual page 229
Multifunctional digital color systems
Hide thumbs
Also See for e-studio3511, e-studio4511:
- Service handbook (552 pages) ,
- Operator's manual (313 pages) ,
- Operator's manual (102 pages)
Table of Contents
Advertisement
(4) Pour the developer material.
Note: When installing the upper cover, make sure
the urethan seal is covered by the upper
cover.
(A-3) Auto-toner sensor
(1) Discharge the developer material (
12.8 (A-2)).
(2) Disconnect 1 connector, remove 1 screw and
take off the auto-toner sensor.
(A-4) Doctor blade
(1) Discharge the developer material (
12.8 (A-2)).
(2) Remove 2 screws and take off the right cover.
November 2003 © TOSHIBA TEC
Chapter
Chapter
12 - 17
Fig. 12-805
Urethan seal
Upper cover
Fig. 12-806
Auto-toner sensor
Fig. 12-807
Right cover
Fig. 12-808
e-STUDIO3511/4511 DEVELOPER UNIT
12
Advertisement
Table of Contents
