Toshiba e-studio3511, e-studio4511 Manual page 13

• Reproduction ratio ............. Actual ratio: 100±0.5%
• Resolution/Gradation ........ Read: 600 dpi
• Eliminated portion ............. Leading edge : 3.0±2.0 mm, Side/trailing edges: 2.0±2.0 mm (black copy)
• Paper feeding .................... Drawers in the equipment – 2 drawers (stack height 60.5 mm, equivalent
• Capacity of originals in the Reversing Automatic Document Feeder (Option)
................. A3 to A5-R, LD to ST-R: 100 sheets/80 g/m
• Automatic duplexing unit ... Stackless/switchback type
• Toner supply ...................... Automatic toner density detection/supply
• Density control .................. Automatic density mode and manual density mode selectable in 11 steps
• Weight ............................... Approx. 112 kg (246.9 lb.)
• Power requirements .......... AC 110V/13.2A, AC 115V or 127V/15A, 220–240V or 240V/8A (50/60 Hz)
• Power consumption .......... 1.5 kW or less (100V series), 1.7 kW or less (200V series)
* The electric power is supplied to the reversing automatic document feeder, finisher, PFP and LCF
through the equipment.
• Total counter ...................... Electronical counter
November 2003 © TOSHIBA TEC
Zooming: 25 - 400% in increments of 1%
(25 - 200% when using RADF)
Write: Equivalent to 2400 dpi x 600 dpi (black copy)
Equivalent to 600 dpi x 600 dpi (color copy)
Leading edge : 5.0±2.0 mm, Side/trailing edges: 2.0±2.0 mm (color copy)
Leading/trailing edges: 5.0±2.0 mm, Side edges: 5.0±2.0 mm (black/color
print)
2
to 550 sheets; 64-80 g/m
PFP – Option (1 or 2 drawers: stack height 60.5 mm, equivalent to 550
sheets; 64-80 g/m 2 (17-22 lb. Bond))
LCF – Option (stack height 137.5 mm x 2, equivalent to 2500 sheets; 64-80
g/m 2 (17-22 lb. Bond))
Bypass feed – Stack height 11 mm, equivalent to 100 sheets; 64-80 g/m
(17-22 lb. Bond)
Toner cartridge replacing method
* The acceptable value of each voltage is ±10%.
1 - 3
(17-22 lb. Bond))
2
(Stack height 16mm or less)
e-STUDIO3511/4511 SPECIFICATIONS
1
2