Output Channel - Toshiba e-studio3511, e-studio4511 Manual

18.3 Output Channel

The followings are four output channels which are not linked with the door switch.
(1) +3.3V
(2) +5.1V
(3) +12V
18
(4) -12V
e-STUDIO3511/4511 POWER SUPPLY UNIT
+3.3VA : CN464
Output to the SYS board
+3.3VB : CN464
Output to the SYS board
+3.3VB : CN466
Output to the LGC board
+3.3VB : CN467
Output to the SLG board
+5.1VA : CN464
Output to the SYS board
+5.1VB : CN464
Output to the SYS board
+5.1VB : CN466
Output to the LGC board, CCL board (via LGC board), PFP/LCF (via LGC
board), Bridge unit (via LGC board)
+5.1VB : CN467
Output to the RADF
+5.1VB : CN467
Output to the SLG board
+5.1VB : CN468
Output to the finisher
+5.1VB : CN469
Output to the FIL board or FUS board
+12VA : CN464
Output to the SYS board
+12VB : CN464
Output to the SYS board
+12VB : CN466
Output to the LGC board
-12VA : CN464
Output to the SYS board
-12VB : CN464
Output to the SYS board
Pins 13, 14, 15 and 16
Pins 19 and 20
Pin 3
Pins 17 and 18
Pins 24 and 26
Pin 25
Pin 1
Pins 5 and 6
Pins 21 and 22
Pin 1
Pin 5
Pin 7
Pin 5
Pin 16 (*NAD/SAD/TWD models only)
Pin 9
Pin 3
18 - 2 November 2003 © TOSHIBA TEC