Toshiba e-studio3511, e-studio4511 Manual page 192

[I] Middle guide
(1) Remove 2 screws and take off the 2nd transfer
front guide.
Note: When installing the 2nd transfer front guide,
push the 2nd transfer front guide upward
and screw it at the position the guide is
pushed to the transfer belt unit.
10
(2) Remove 2 screws and take off the middle guide.
Note: When taking off the middle guide, pay
attention not to drop the removed paper dust
from the brush into the inside of the
equipment.
(3) Clean the paper dust removal brush attached
on the middle guide.
e-STUDIO3511/4511 PAPER FEEDING SYSTEM
Fig. 10-453
Fig. 10-454
1
Fig. 10-455
10 - 24
2nd transfer front guide
2nd transfer front guide
2
Middle guide
November 2003 © TOSHIBA TEC