Toshiba e-studio3511, e-studio4511 Manual page 319
Multifunctional digital color systems
Hide thumbs
Also See for e-studio3511, e-studio4511:
- Service handbook (552 pages) ,
- Operator's manual (313 pages) ,
- Operator's manual (162 pages)
Table of Contents
Advertisement
(3)
Remove the screw and release the rear latch.
[G] Opening/Closing lever
(1)
Take off the ADU, ADU inside rear cover, ADU
opening/closing switch, paper guide, and ADU
cover (
Chapter 17.5 [A] to 17.5 [E]).
(2)
Remove 2 screws and take off the opening/
closing lever.
[H] ADU entrance sensor, ADU exit sensor
(1)
Take off the ADU, ADU inside rear cover, ADU
opening/closing switch, paper guide, and ADU
cover (
Chapter 17.5 [A] to 17.5 [E]).
(2)
Disconnect the connector and release the
latch to take off the ADU entrance sensor.
(3)
Disconnect the connector and release the
latch to take off the ADU exit sensor.
November 2003 © TOSHIBA TEC
Rear latch
Fig. 17-509
Screw
Fig. 17-510
ADU entrance sensor
Fig. 17-511
Fig. 17-512
17 - 13
e-STUDIO3511/4511 AUTOMATIC DUPLEXING UNIT
Screw
Opening/Closing lever
Connector
Connector
ADU exit sensor
17
Advertisement
Table of Contents
