Programming Error Codes - Hitachi SJ7002 Series Instruction Manual

Programming Error Codes

The SJ700
indicate a programming error. Programming errors exist when one parameter conflicts with the
meaningful range permitted by related parameter(s). Note that particular real-time frequency
(speed) input levels can cause a conflict in some situations. After a conflict exists, the error
code will appear on the display, or you can view it later with D090 in Monitor Mode. Also, the
PGM LED on the display will flash ON/OFF when programming. These indications are
automatically cleared when the parameter is corrected to the allowed range.
Programming Error
Code
001 201
002 202
004 204
304
005 205
305
006 206
306
009
012 212
015 215
016 216
019
021 221
025 225
031 231
032 232
035 235
335
036
037
inverter operator keypad displays a special code (begins with the
2
Parameter out of bounds
Code Description
A8061 / A261 Frequency upper limit
setting; 1st, 2nd motor
A062 / A262 Frequency lower limit
setting; 1st, 2nd motor
A003 / A203 / Base frequency setting;
A303 1st, 2nd, 3rd motor (*1)
F001, Output frequency setting,
A020 / A220 / Multi-speed freq. setting;
A320 1st, 2nd, 3rd motor (*2)
A021 to A035 Multi-speed freq. settings
P015 Home search speed
setting
A062 / A262 Frequency lower limit
setting; 1st, 2nd motor
F001, Output frequency setting,
A020 / A220 Multi-speed freq. setting;
1st, 2nd motor
A021 to A035 Multi-speed freq. settings
A061 / A261 Frequency upper limit
setting; 1st, 2nd motor
F001, Output frequency setting,
A020 / A220 Multi-speed freq. setting;
1st, 2nd motor (*2)
A061 / A261 Frequency upper limit
setting; 1st, 2nd motor
A062 / A262 Frequency lower limit
setting; 1st, 2nd motor
F001, Output frequency setting,
A020 / A220 / Multi-speed freq. setting;
A320 1st, 2nd, 3rd motor
A021 to A035 Multi-speed freq. settings
A038 Jog frequency setting
SJ700
Boundary defined by...
<, > Code
> A004 / Maximum frequency;
A204 / 1st, 2nd, 3rd motor
A304
>
>
>
>
>
> A061 / A261 Frequency upper limit setting;
1st, 2nd motor
>
>
< P015 Home search speed setting
< A062 / A262 Frequency lower limit setting;
1st, 2nd motor
<
< B082 Start frequency adjustment
<
<
<
<
3–75
Inverter
2
character) to
Description