FARGO electronics HDP5000 single-side User Manual page 395

RESTRICTED USE ONLY
Glossary of Terms (continued)
Term
Thermocouple
Thin Film
Overlaminate
Through-hole
Timeout
TOF (Top of Form)
Track
Troubleshooting
TrueType (TT)
UltraCard
UltraCard III
Update
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.4)
Definition
A device for measuring temperature using a junction of two wires
of dissimilar metals that produce a voltage when heated that
varies proportionally with the temperature.
A 0.25-mil thick resin material that enhances card security and
durability applied over the printed surface with a hot Roller.
Available as clear or with embedded holographic-type security
images.
A method of mounting circuit elements with the leads passing
through holes in the circuit Board and soldered on the opposite
side.
An interruption of a print job that occurs when a function is not
completed in the time allotted by the operating system.
The leading edge of the card, as it travels through the Printer.
The area on a mag stripe designated to contain the magnetic data
string.
The process of investigating and determining the cause of a
problem.
A font format that produces each character using a mathematical
equation, rather than a graphical representation, resulting in a
much sharper, cleaner image.
The FARGO brand of card stock recommended for use in FARGO
Printers, with the necessary glossy surface and composed of
PVC.
The FARGO brand of card stock, recommended for use in
FARGO Printers that laminate, with the necessary glossy surface
and composed of PVC and PET to prevent heat distortion.
The process of installing a new revision of software or Firmware
to implement new changes to the Printer's command codes and
procedures.
Fargo Electronics, Inc.
Continued on the next page
17-20