Using The Lrc Generation Dropdown List - FARGO electronics HDP5000 single-side User Manual

RESTRICTED USE ONLY

Using the LRC Generation dropdown list

Use this option to customize the LRC Generation Mode (used to encode the magnetic data
on the currently selected track).
Step Procedure
•
1
Select No LRC to change the LRC Generation to none.
OR
•
Select Even Parity to change the LRC Generation to Even Parity. (Note:
This is the default for all tracks.)
OR
•
Select Odd Parity to change the LRC Generation to Odd Parity.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.4)
Fargo Electronics, Inc.
8-75