Adjusting For The Resin Dither - FARGO electronics HDP5000 single-side User Manual

High definition card printer/encoder

Table of Contents

RESTRICTED USE ONLY

Adjusting for the Resin Dither

Select the appropriate dither method according to the type of image to be printed. (Note:

This option only affects those objects printed on the backside of a card with the resin black

Panel of a YMCK or YMCKK Print Ribbon. This is only enabled when using at least one K

panel and dual sided enabled, splitting one set of panels.)

Select Optimized for Graphics when printing lower quality images (e.g.,

clipart, logos, etc.) with resin.

Select Optimized for Photo when printing photo quality images with resin.

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.4)

Fargo Electronics, Inc.