Table of Contents
Advertisement
RESTRICTED USE ONLY
Upgrading the Main Firmware with the Fargo Workbench Printer Utility
(continued)
Step
Procedure
3
Access the Upgrade Firmware window from the Actions Menu, as shown
below.
4
Select the New Firmware File by clicking Browse and selecting the Firmware
file from the appropriate folder.
5
Begin the upgrade by clicking Upgrade, as shown below.
Refer to the Fargo Workbench Printer Utility User Guide at this time.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.4)
Fargo Electronics, Inc.
6-49
Advertisement
Table of Contents
Troubleshooting
