Saving Addresses; Resetting Passwords - FARGO electronics HDP5000 single-side User Manual

RESTRICTED USE ONLY

Saving addresses

Step Procedure.
1 See the Accessing the Network Setup Menu
Network Settings menu:
2 Select Next on the LCD to view the Save Addresses menu entry.
3 Press the Select button to save the current network settings (IP address,
GW, SN Mask) as the stored settings which will be used when automatic
address assignment using DHCP is disabled.

Resetting Passwords

Step Procedure
1 See the Accessing the Network Setup Menu
Network Settings menu:
Options -> Menu -> Next -> Network Settings
2 Select Next on the LCD to view the Reset Passwords menu entry.
3 Press the Select button to reset the User passwords to the default settings of
empty strings.
(Note: This can be used when the passwords are not known.)
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.4)
Options -> MENU -> Next -> Network Settings
Fargo Electronics, Inc.
procedure to access the
procedure to access the
6-52