Table of Contents
Advertisement
RESTRICTED USE ONLY
Reviewing the Lamination Module Sequence of Operations
The LAM sequence of operations begins after printing has occurred with the Card Printer.
Step Process
1
The card is fed onto the Lamination Module.
2
The card is fed to the Card Position Sensor.
3
The Lamination Take-up Motor begins cycling until the Lamination Sensor
detects the mark.
4
The Card Feed Motor activates to place the leading edge of the card on the Lam
Roller.
5
The Lam Roller Lift Motor cycles until the Transfer Roller Lift Sensor detects the
roller is down.
6
The Card Feed Motor and the Lamination Drive Motor activate for the length of
the card.
7
The Lam Roller Lift Motor cycles until the Lam Roller Lift Sensor detects the
roller is up.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.4)
Fargo Electronics, Inc.
1-7
Advertisement
Table of Contents
Troubleshooting
