FARGO electronics HDP5000 single-side User Manual page 188

RESTRICTED USE ONLY
Reviewing Frequently-asked Questions (continued)
Question
How can I find the IP
address of my Ethernet
Printer?
Can I print from my PC to
multiple Ethernet Printers?
Can multiple PC's print to
my Ethernet Printer?
Can I print from my PC to
an Ethernet Printer on a
different network segment?
Can I use Fargo IP-Tracer
to locate Printers on a
different network segment?
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.4)
You can find it in the LCD of the Printer if the Ethernet
option is functioning properly.
Select Info, then select Next several times until the IP
address is shown.
Yes. Use the Windows "Add Printer Wizard" to create a new
printer instance for the additional printer. This may require
adding a new "Remote TCP/IP Card Printer Port" configured
to communicate to the new printer at the proper IP address.
See the appropriate Windows documentation for additional
help.
Yes. Each PC must install the Printer Driver software for the
specific Fargo Ethernet-enabled Printer and connect to the
intended Printer, using the correct IP address.
Yes. If you know the IP address of the Printer on any
segment of your network, you will be able to print to it.
No. The IP-Tracer can only locate Fargo-compatible Printers
located in the same network segment (as the PC running IP-
Tracer).
Fargo Electronics, Inc.
Answer
Continued on the next page
6-59