FARGO electronics HDP5000 single-side User Manual page 394

RESTRICTED USE ONLY
Glossary of Terms (continued)
Term
Spooling
SS (Start Sentinel)
Stacker
Stepper Motor
String
Surface mount
Surge Protector
Switch Box
TAC
Temp file
Test Print
Thermistor
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.4)
Definition
Rather than moving a print job directly to the Printer, the job is
written to the disk so that the User can access the application
faster while Windows takes care of printing in the background.
The character denoting the end of a magnetic data string.
The device that moves the finished cards onto the output column
ordering them First In, First Out.
A Motor whose shaft turns in discrete steps, rather than
continuously.
A sequence of characters that form a line of data.
A method of mounting circuit elements onto the surface of a
circuit Board, attached at solder pads, rather than through holes
in the Board.
An electronic device, placed in serial to the Printer's power
supply, that prevents damage to the Printer from electronic surges
and electrical current that is outside of the normal parameters.
An electromechanical device to which a User can connect several
peripheral devices to the Parallel Port simultaneously, yet using
the selector switch to designate the active port.
Thermal Acceptance Composite cards. Card stock produced by
laminating sheets of PVC with sheets of PET for better thermal
distortion resistance. Ultra III cards.
A temporary file, generated automatically by Windows, to store
the information for an active document. Windows should delete
these files when the application is closed.
A file stored in or generated through windows that is sent to the
Printer to test basic functionality.
An electronic resistor on the Printhead with a resistance value
that varies in proportion to the heat to which it is exposed.
Fargo Electronics, Inc.
Continued on the next page
17-19