Using The Resin Heat Adjust Option; Using The Sleep Time Option; Using The Standby Time Option; Using The Blush Point Option - FARGO electronics HDP5000 single-side User Manual

RESTRICTED USE ONLY Fargo Electronics, Inc.

Using the Resin Heat Adjust Option

Use this adjustment for Black resin text and barcodes appear faded or too light/dark.

Using the Sleep Time Option

This setting adjusts the time until printer stops energizing the transfer roller conserve energy.
A setting of "0" will disable. (Note: The counter for this setting starts after Standby Time has
elapsed.)

Using the Standby Time Option

This setting adjusts the time until printer goes into a reduced transfer roller temp to conserve
energy. (Note: A setting of "0" will disable. Settings are in minutes.)

Using the Blush Point Option

The blush point is compensation during printing:
• There is no dye transfer.
• There is no a light gray line on a portion of the card.
• It should be white.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.3) 9-28