FARGO electronics HDP5000 single-side User Manual page 253

RESTRICTED USE ONLY
Using the Advanced Image Color window (continued)
Step Procedure
3 For the Balance slider bar controls, see below.
•
Click OK to accept any variance from the default (for this specific slider
bar) and return to the Image Color tab window.
•
Click Cancel to negate any variance on the slide and return to the Image
Color tab window.
•
Click on the Default button to clear changes back to the default settings
for this window only.
In addition, here are further instructions:
•
Yellow Balance (Default, 0%): Move the slide to the left for (-) or less
yellow as an individual color. Move the slide to the right (+) or more
yellow as an individual color balance. Study the image (on the right) to
determine correct color yellow balance effect.
•
Magenta Balance (Default, 0%): Move the slide to the left for (-) or less
magenta as an individual color. Move the slide to the right (+) or more
magenta as an individual color balance. Study the image (on the right) to
determine correct color magenta balance effect.
•
Cyan Balance (Default, 0%): Move the slide to the left for (-) or less
cyan as an individual color balance. Move the slide to the right (+) or
more cyan as an individual color balance. Study the image (on the right)
to determine correct color cyan balance effect.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.4)
Fargo Electronics, Inc.
8-48