Table of Contents
Advertisement
RESTRICTED USE ONLY
Changing the Root Password
The Passwords page allows the User to change the passwords needed to login as a User.
Changes to all settings require a login. (Note: However, these changes are only protected
by password after the password has been set. Users can only be added or removed using
Telnet commands.)
Step
Procedure
1
Select the Administration link.
2
Select the Passwords link to get to the Password web page.
3
Enter the current password in the Root Password Old textbox or leave it
blank if no password has been previously set.
4
Enter the new password in the Root Password New textbox or leave it
blank if you want to remove the old password.
5
Re-enter the new password in the Root Password Confirm textbox or
leave it blank if you want to remove the old password.
6
Select the Submit button.
7
Log in as a root User (using the password) if you are so prompted. (Note:
Any change of setting will only be accepted after you have successfully
logged in.)
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.4)
Fargo Electronics, Inc.
6-39
Advertisement
Table of Contents
Troubleshooting
