FARGO electronics HDP5000 single-side User Manual page 119

RESTRICTED USE ONLY
Troubleshooting with the Printer Error Message Table (continued)
Printer Error
Message
Print Film Out
Print Film is not
Installed
Print Film Sensor
Error
Wrong Print Film
Installed
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.4)
Cause
The Print Film installed in
the printer is empty.
No Print Film is installed in
the Printer.
The Printer cannot find
the next panel on the Print
Film.
An incorrect Print Film has
been installed, or a driver
setting is incorrect.
Fargo Electronics, Inc.
Solution
Install new Film and press the
Resume button to continue printing.
To cancel the print, press the
Cancel Print button or the Cancel
button located on the Printer.
Install the Film and press Resume.
To cancel the print, press the
Cancel Print button or the Cancel
button located on the Printer.
Check that the Print Film is installed
properly and press Resume.
To cancel the print, press the
Cancel Print button or the Cancel
button located on the Printer.
Ensure that the appropriate Print
Film is installed and press the
Resume button located on the
Printer to continue printing.
To cancel, press the Cancel Print
button or the Cancel button located
on the Printer.
5-35