Status Monitoring By Volume - HP XP P9500 Software User's Manual

Hp p9000 business continuity manager user guide

Hide thumbs Also See for XP P9500:

Table of Contents

In the following situations, Business Continuity Manager issues an error message and the command

terminates abnormally.

One or more copy pairs in the copy group cannot transition to the status specified by the

GOTO parameter, due to failure.

All volumes in the copy group do not transition to the specified copy pair status within the

time specified by the TIMEOUT parameter.

The YKEWAIT command with the DEVN parameter specified can be used to monitor status transitions

for a specific copy pair in a copy group.

Status Monitoring by Volume

An error will occur when copy pair information cannot be obtained from the storage system of the

P-VOL or S-VOL, due to a failure. However, the YKEWAIT command can be used with the TO

parameter specified, so that status monitoring is performed only for either the P-VOL or S-VOL, and

errors are suppressed.

The YKEWAIT command can also be used with the DEVN parameter specified in order to monitor

status changes for a specific volume in a copy group.

Business Continuity Manager with replication products