9 Using the ISPF panels
This chapter explains how to use the ISPF panels to perform basic Business Continuity Manager
operations. The ISPF panels themselves are described in detail in the HP StorageWorks P9000 for
Business Continuity Manager Software Reference Guide.
"Acquiring volume information" (page 430)
"Creating a path set" (page 439)
"Establishing a logical path" (page 456)
"Defining a route list" (page 457)
"Registering a command device in a Storage System" (page 470)
"Remote scan procedure" (page 472)
"Defining a copy group" (page 477)
"Defining a copy group container" (page 485)
" Defining an Open/MF consistency group" (page 492)
"Operating copy groups" (page 500)
Acquiring volume information
This section explains how to acquire volume information, assuming that the prefix of the configuration
file is CONFIG01.
Local scan procedure
This section explains how to perform a local scan (to acquire information about the local site's
storage system), using the volume configuration example shown in
Local scan on the primary site
Local scan on the secondary site
Transferring the disk configuration definition files from the secondary site to the primary site
Figure 1 14 Volume configuration example for acquiring device information
Scanning a device locally on the primary site (local scan)
To scan a volume on the primary site:
430 Using the ISPF panels
Figure 1 14 (page
430).