Definition Procedure (2Dc Configuration) - HP XP P9500 Software User's Manual

Figure 76 (page 131)
the secondary site. The step numbers indicated in
in "Definition procedure (2DC configuration)" (page
Figure 76 Process Flow for Defining a 2DC Configuration without a Host at the Secondary Site
#1 This procedure is not required if the path has been established by using Remote Web Console.
#2 A logical path must be built for the reverse direction if you are:
Using Continuous Access Journal for Mainframe
Using the Reverse Resync Function

Definition procedure (2DC configuration)

This section explains how to define a 2DC configuration with a host at the secondary site by using
the Remote DKC Control Function.
First, set the items that need to be set by using Remote Web Console from among the items listed
in Table 30 (page 128)
The following is the legend used for the figures represented in the procedures
shows the process flow for defining a 2DC configuration without a host at
Figure 76 (page 131) corresponds to the procedures
131).
Defining a 2DC configuration 131