Fabric monitoring
NOTE
Monitoring is not supported on Hosts. The upper limit to the number of HBA and CNA ports that can
be monitored at the same time is 32. The same upper limit applies if switch ports and HBA ports are
combined. You can select switch ports and adapter ports from a maximum of ten devices.
Fabric monitoring enables discovery of and data collection for the specified fabric and all
associated devices. The Management application enables you to view fabric monitoring status
through the Discover Setup dialog box. The following table illustrates and describes the icons that
indicate the current status of the discovered fabrics.
TABLE 4
Icon
To change the monitoring interval, refer to
Monitoring discovered fabrics
NOTE
Monitoring is not supported on Hosts.
To monitor a fabric and all associated devices, complete the following steps.
1. Select Discovery > Setup.
2. Select the fabric you want to monitor from the Discovered Addresses table.
DCFM Professional User Manual
53-1001773-01
Monitor Icons
Description
Displays when the fabric is managed and the switch management status is okay.
Displays when the fabric is managed and the switch management status is not okay.
Displays when the fabric is not managed.
The Discover Setup dialog box displays.
"Configuring asset polling"
2
Fabric monitoring
on page 95.
51