HP XP P9500 Software User's Manual page 224

Hp p9000 business continuity manager user guide

Hide thumbs Also See for XP P9500:

Table of Contents

Execute the YKSUSPND command for the Continuous Access Synchronous Z copy group

container (TCCG) to suspend the copy pairs.

To change the timestamp transfer mode, you need to suspend and then resynchronize the

Execute the YKEWAIT GOTO(SUSPEND) command to continue monitoring until the status has

changed to SUSPOP.

From the ISPF panel, change the timestamp transfer mode for the Continuous Access

Synchronous Z copy groups (TCCG, TCG1, and TCG2) from disabled to enabled.

To enable the timestamp transfer mode, specify Y for TIMESTAMP in the Copy Group Attributes

For Container (TC) panel.

Execute the YKRESYNC command for the Continuous Access Synchronous Z copy group

container (TCCG) to resynchronize the copy pairs.

Execute the YKEWAIT GOTO(DUPLEX) command to continue monitoring until the status has

changed to DUPLEX.

The change of the timestamp transfer mode for the Continuous Access Synchronous Z copy

groups is applied.

224 Configuration Definitions

Troubleshooting