Generating Csv Files For Copy Group Definition; Required Files (Csv File For Copy Group Definition); Generation Example (Csv File For Copy Group Definition) - HP XP P9500 Software User's Manual

//SYSABEND
//INPAIR
//INEXCTG
//SYSTSIN
YKIMPORT PREFIX(BCM) BASEGROUP(BASE.UR) NEWGROUP(CG.UR)
/*
The amount of memory required to execute the command depends on the number of volumes used
by the copy group. For details about how to set an appropriate value, see the HP StorageWorks
P9000 for Business Continuity Manager Software Installation Guide.

Generating CSV files for copy group definition

By executing the YKEXPORT command, you can generate the following CSV files from a copy
group definition file.
Pair information CSV file: A CSV file in which copy pair information in a copy group container
is described.
EXCTG information CSV file: A CSV file in which EXCTG information in a 4x4 configuration
copy group container is described. This file is generated for 4x4 configurations only.
CSV files can be generated for all copy types. This section describes how to generate CSV files.

Required files (CSV file for copy group definition)

To generate a CSV file by executing the YKEXPORT command, the following files are required:
Disk configuration definition file
Copy group definition file
Before executing the YKEXPORT command, allocate and catalog the CSV file datasets with the
DD names below.
Pair information CSV file: OUTPAIR
EXCTG information CSV file: OUTEXCTG
For details on the dataset formats, required device capacity , and description rules, see the HP
StorageWorks P9000 for Business Continuity Manager Software Reference Guide.

Generation example (CSV file for copy group definition)

Figure 99 (page 246)
copy group definition file.
DD SYSOUT=*
DD DSN=BCM.PAIRCSV,DISP=OLD
DD DSN=BCM.EXCTGCSV,DISP=OLD
DD *
shows an example of generating CSV files and checking the contents of the
Generating a copy group definition file by using CSV files 245