Example; Report Command; Format; Operands - HP XP P9500 Software User's Manual
Hp p9000 business continuity manager user guide
Hide thumbs
Also See for XP P9500:
- Reference manual (395 pages) ,
- Manual (348 pages) ,
- User manual (193 pages)
Table of Contents
Advertisement
DISPLAY
Used to display the status of Business Continuity Manager Monitor. If values specified in the Business
Continuity Manager Monitor parameter files are changed after Business Continuity Manager
Monitor has started, the values that are in effect at that moment are displayed. Even if you change
the values after Business Continuity Manager Monitor has started, the values specified in the
Business Continuity Manager Monitor parameter files are not changed. The information to be
displayed is specified by the following sub-operands:
OPTIONS
Values for the parameters in the YKMONOPT file are output.
CGDEF
Values for the parameters in the YKMONCG file are output.
OPCMDS
Commands that are waiting to be executed are displayed in the console.
Example
To display the values that are currently in effect for the parameters specified in the YKMONOPT file
in the Business Continuity Manager Monitor instance whose cataloged procedure for startup name
is YKBCMMON, enter the following command:
F YKBCMMON,DISPLAY OPTIONS
To display the commands that are waiting to be executed by the Business Continuity Manager
Monitor instance whose cataloged procedure for startup name is YKBCMMON, enter the following
command:
F YKBCMMON,DISPLAY OPCMDS
REPORT command
To display the information for a copy group whose ID is specified in the YKMONCG file, use the
MODIFY REPORT command. The following information can be displayed:
Number of copy pairs in various copy pair statuses
Details on copy pairs
Operational information on copy groups
Consistency information on copy groups
Format
If both the name of the cataloged procedure for startup and the identification name were specified
in the START command:
MODIFY
1cataloged-procedure-for-startup-name.]identification-name
,REPORT 1CGID=copy-group-id[,output-type][,message-level]
If only the name of the cataloged procedure for startup was specified in the START command.
MODIFY
1cataloged-procedure-for-startup-name
,REPORT 1CGID=copy-group-id[,output-type][,message-level]
Operands
cataloged-procedure-for-startup-name
Used to specify the name of the cataloged procedure for startup that was specified in the START
command when Business Continuity Manager Monitor was started.
522 Automatic operation using BCM Monitor
Advertisement
Table of Contents
Troubleshooting
