Last Mirror Copy Status Window; Last Mirror Copy Status Window Contents - HP NetServer AA 6200 Administrator's Manual

Last Mirror Copy Status Window

The Last Mirror Copy Status window displays mirror copy status information for the Endurance
server. The Last Mirror Copy Status window is shown in
4-6. To control how this window displays, use the Endurance Manager options described in
Table 4-7.
Because this window displays the last mirror copy status as seen by a particular IOP, it is
possible for the IOPs to return last mirror copy status reports that appear somewhat different.
However, any IOP that is actively serving the CEs (in other words, one that is neither offline,
faulted, nor disabled) provides complete and current mirror copy status reports.
Table 4-6 Last Mirror Copy Status Window Contents
Option
Disk
Status
4-14
Figure 4-4 Last Mirror Copy Status Window
Description
Identifies the SCSI disks associated with a mirror set (for example, CE Disk0).
Note: Endurance disk names, such as Disk0 and Disk1, do not necessarily
match the names of Windows similarly named disks, as seen when
viewed with Disk Administrator window.
Contains one of the following:
Done
Failed
Figure 4-4, and is described in
Mirror copy completed successfully.
Mirror copy did not complete.
Note: A mirror copy may not complete for a variety
of reasons, such as an IOP may have been
taken down, a disk may have failed or been
disabled, or a disk may have encountered a
bad spot.
HP Netserver AA Solution Administrator's Guide
Table