Copy Group Pair Detail Panel - HP XP P9500 Reference Manual

Table 50 Contents of the Setting C/T ID Attributes Panel
Item
C/T ID (JNLG)
sub C/T ID (JNLG).
If the copy type is BC, CA, or CAA, specifying a value in C/T ID (JNLG) and then pressing Enter
displays the Copy Group Pair Detail panel. If the copy type is CAJ, specifying a value in C/T ID
(JNLG) and sub C/T ID (JNLG) and then pressing Enter displays the Copy Group Pair Detail panel.

Copy Group Pair Detail Panel

The Copy Group Pair Detail panel, which displays details about the copy pairs in a copy group,
is displayed in these cases:
If Use Container in the Add Copy Group panel is cleared, and the Enter key is pressed
If the copy group for which e is specified for AC in the Copy Group Selection List panel is not
a CG container
If e is specified for AC in the Copy Group Detail Definition panel
If the F5=Add key is pressed in the Copy Group Detail Definition panel
If you press the F5=Add key in the Copy Group Pair Detail panel, the Pair Selection List (Primary)
panel is displayed. If you press the F5=Second key in the Pair Selection List (Primary) panel, the
Pair Selection List (Secondary) panel is displayed. From these panels, you can select the devices
to pair in order to define a copy pair.
If you press the F12=Cancel key while you are defining a new copy pair, and the copy group is
not a CG container, display returns to the Copy Group Selection List panel. If the copy group is a
CG container when you press the F12=Cancel key, display returns to the Copy Group Detail
Definition panel. If you have already defined a copy pair during this process, a confirmation dialog
box (Confirm Cancellation of Editing panel) is displayed for you to confirm cancellation of the
changes. For details about the Confirm Cancellation of Editing panel, see
Device Delete Panel" (page
If you change the definition in the Copy Group Detail Definition panel and press the F3=Exit key,
the Confirm Configuration File Update panel appears. For details about the Confirm Configuration
File Update panel, see
If the configuration file you are trying to update has already been updated by another user, the
Confirm Configuration File Update panel is displayed, and then the Update Warning panel is
displayed. For details about the Update Warning panel, see
82 ISPF Panels
Description
If the copy type is BC, CA, or CAA,
specify the C/T group ID (required for
CAA).
Specify a value between 00 and 7F
(depending on the storage system
type).
If the copy type is CAJ, specify the
journal group number of the primary
site as the C/T group ID (required for
CAJ).
Specify a value between 00 and FF.
Specify the journal group number of
the secondary site as the sub C/T
group ID (required for CAJ).
Specify a value between 00 and FF.
NOTE: For configurations that use
delta resync, specify the same value
for both the CAJ copy pair and the
CAJ copy pair for delta resync.
172).
"Confirm Configuration File Update Panel" (page
Specifiable copy types
BC
CA
CAA
CAJ
CAJ
"Confirm Command
175).
"Update Warning Panel" (page 19).