HP XP P9500 Reference Manual page 27

When using the Remote DKC Control Function, a route list ID, and a route label.
The parameters for the YKWATCH command, which monitors volume status, and the JCL for
background jobs.
The Set Defaults panel is shown in
Figure 15 Set Defaults Panel
Table 10 (page 27) describes the items in the Set Defaults panel.
Table 10 Contents of the Set Defaults Panel
Item
1, 2
Configuration File Prefix
Local Device Address Domain ID
ISPF Log Max
3
Remote DKC Function
3
Preset RouteListID
Figure 15 (page 27)
Description
Specify the prefix of the configuration file name in alphanumeric characters
(required).
Do not use hyphens.
Specify the DAD ID of the local site in alphanumeric characters. (required)
Do not use hyphens.
Specify the device address domain ID of the host on which Business Continuity
Manager is running (the host DAD ID) by using alphanumeric characters
(required).
Hyphens cannot be specified.
Use the following values to set the Remote DKC Control Function:
Y—Default to the Remote DKC Control Function.
N—Do not default to the Remote DKC Control Function.
Specify ROUTE parameter value (the route list ID) for the YKLOAD command. Do
not use hyphens.
(values in the figure are samples only).
Set Defaults Panel (Prefix and DAD ID Settings) 27