HP XP P9500 Reference Manual page 43

Figure 30 Panel Transitions from the Route Config Panel
#1: Displayed only when the leftmost AC has been specified.
#2: Displayed for a storage system when 1 is specified for the selection field of the storage system
in the Add Route Entry panel or the Edit Route Entry panel.
Displayed for a storage system when 2 is specified for the selection field of the storage system in
the Add Route Entry panel or the Edit Route Entry panel.
The Route Config panel is shown in
Figure 31 Route Config Panel
Table 23 (page 43) describes the items in the Route Config panel.
Table 23 Contents of the Route Config Panel
Item Description
AC Specify an action.
s: Displays the list of storage systems included in the selected route list. The Route List
Information panel appears.
d— Deletes the route list ID
RouteList ID Route list ID
1
Route list definition files for the route list IDs that are not selected are also loaded. If there is an error in any of these route
list definition files and the Exception Message panel appears, you can edit a selected route list definition file by closing
the Exception Message panel.
2
Only the route list definition file is deleted when deleting the route list ID. The command device definition file is not
deleted.
Figure 31 (page 43).
1
2
Discover/Define Configuration Panel (Configuration File Definition) 43