HP XP P9500 Reference Manual page 71

Table 46 Items in the Copy Group Detail Definition panel (continued)
Item
Grp Num
C/T ID
sub
Pair(s)
Primary S
S/N
ArbCdev
Secondary S
S/N
ArbCdev
1
Unless all volumes are SIMPLEX, execution might not be executed properly.
2
Even if you disable EXCTG in the definition, it is not actually disabled on the DKC until the YKMAKE command is
re-executed.
Before changing the definition, execute the YKDELETE command to dissolve the copy group.
If you press the F5=Add key in the Copy Group Detail Definition panel, the Copy Group Pair Detail
panel (in which the copy pair is not defined) is displayed, and then the Setting C/T ID Attributes
panel appears . In this panel, you can define a consistency group ID.
Description
can be specified only in the Copy Group Detail Definition
panel).
d: Deletes a copy group (this setting can be specified only
in the Copy Group Detail Definition panel).
s: Displays a copy pair in the copy group. This setting
displays the Browse Copy Group Pair Detail panel (this
setting can be specified only in the Browse Copy Group
Detail Definition panel).
Group ID number of the copy group
This value corresponds to the value of n in CopyGroup.n.
. of the copy group structure.
Specify the consistency group ID (hexadecimal).
This option cannot be specified for Continuous Access
Synchronous for Mainframe copy groups with the HyperSwap
attribute.
Specify the subconsistency group ID (hexadecimal).
The number of copy pairs in the applicable C/T group.
Specify S to register a storage system as the supervisor DKC.
You can only specify this for one storage system in a primary
site.
Primary storage system serial number
If multiple storage systems exist for one C/T ID and sub C/T
ID combination, * is displayed to the right of the serial
number.
Specify the arbitration command device of the primary site.
You do not have to specify this item for the supervisor DKC,
or a subordinate DKC that exists on the same storage system
as the supervisor DKC.
Specify S to register a storage system as the supervisor DKC.
You can only specify this for one storage system in a
secondary site.
Secondary storage system serial number
If multiple storage systems exist for one C/T ID and sub C/T
ID combination, * is displayed to the right of the serial
number.
Specify the arbitration command device of the secondary
site.
You do not have to specify this item for the supervisor DKC,
or a subordinate DKC that exists on the same storage system
as the supervisor DKC.
Discover/Define Configuration Panel (Configuration File Definition)
When effective
N/A
When the YKMAKE
1
command is executed.
When the YKMAKE
1
command is executed.
When the YKMAKE
1
command is executed.
N/A
When the YKMAKE
1
command is executed.
When the YKMAKE
1
command is executed
N/A
When the YKMAKE
1
command is executed.
71