HP XP P9500 Reference Manual page 327

3
Created for each CopyGroup information item. This value is the copy group
number.
4
Average matching rate of copy pairs in a copy group.
5
Created for each Stats information item.
6
Created for each Pair information item. The value is the copy pair number.
7
The value acquired from the primary site is set. If information is not acquired, the
value is 0. Note that if the copy type is BC, a value acquired from the Primary or
secondary site is set.
8
Effective only when timer type of C/T group is SYSTEM. If information is not
obtained, value is null.
9
The value is invalid when the copy type is CAJ.
10
The value is invalid.
1 1
The value is 1 when the EXCTG function is used.
12
Information can be acquired only when the EXCTG function is used.
13
Information can be acquired only when the EXCTG function is used during a
forward operation.
14
Information can be acquired only when the EXCTG function is used during a
reverse operation.
15
For supervisor DKC, the value is null.
16
The value is null when information cannot be acquired.
17
Displayed in GMT.
18
The details for the journal status are shown in the following table:
Cause code Details
(hexadecimal)
00 Initial status
10 Start status
1 1 Restore journal was interrupted/stopped (Indicates the status when restore journal
is stopped due to a copy pair suspend or dissolve operation for the S-VOL, and a
transition is performed to the start status)
20 Interrupted status
22 Interrupted
40 Stopped status
44 Stopped
19
The value will be invalid if a command is executed for a delta resync pair.
20
The value is always 0.
About REXX Variable Structures 327