HP XP P9500 Reference Manual page 218

Table 1 14 YKINSCHK Command Output Items (continued)
Output item
Current User SVC:
Version
Dynamic registered
user SVC:
SVC Number
Dynamic registered
user SVC:
Version
Static installed
user SVC:
SVC Number
Static installed
user SVC:
Version
Directions
Output example
The following is an output example of the YKINSCHK command:
READY
YKINSCHK
Security Setting ..........: OK
User SVC Routine ..........: OK
Facility Class Profiles Query
Facility Class Profiles Commands : STGADMIN.YKA.BCM.COMMANDS
Directions
The current setup is listed above.
An unregistered profile is listed as N/A.
The RACF settings are necessary in order to use CLI commands.
After a profile is defined in the RACF FACILITY class, a user can use
CLI commands by being given the access rights of the profile.
There are the following two kinds of profiles:
- Facility Class Profiles Query
- Facility Class Profiles Commands
To give a user the permissions necessary to use all of the BCM commands:
1. Make the RACF FACILITY class active.
2. Define the STGADMIN.YKA.BCM.COMMANDS profile in the FACILITY class.
3. Give the user the access rights of the profile.
To give a user the permissions necessary to use some of the BCM commands
(the reference commands):
4. Make the RACF FACILITY class active.
5. Define the STGADMIN.YKA.BCM.YKQUERY profile in the FACILITY class.
6. Give the user the access rights of the profile.
Version of User SVC for this program .............: v.r.m-nn(zz)
Current User SVC
Dynamic registered User SVC : SVC Number 200 Version v.r.m-nn(zz)
Static installed User SVC
Directions
218 CLI Commands
Explanation
Outputs the user SVC version that is currently enabled. If version information cannot be
acquired, N/A is output.
Outputs the SVC number of the user SVC that was registered dynamically by the
YKALCSVC command. If no SVC number can be acquired, N/A is output.
Outputs the version of the user SVC that was registered dynamically by the YKALCSVC
command. If no version information can be acquired, N/A is output.
Outputs the SVC number of the user SVC that was defined as an IEASYMxx parmlib
member and registered statically. If no SVC number can be acquired, N/A is output.
Outputs the version of the user SVC that was defined as an IEASVCxx parmlib member
and registered statically. If no version information can be acquired, N/A is output.
Outputs an explanation about the relationship between a dynamically or statically
registered user SVC and the user SVC that will be enabled.
: STGADMIN.YKA.BCM.YKQUERY
: SVC Number 200 Version v.r.m-nn(zz)
: SVC Number 251 Version v.r.m-nn(zz)