HP XP P9500 Reference Manual page 113

Table 66 Contents of the Manage Copy Groups Panel (continued)
Item Description
v: Execute the YKQUERY command with the VERIFY parameter specified.
f: Executes the YKEWAIT command with the TIMEOUT(0) parameter specified.
If there are many copy pairs, you can obtain the volume status more quickly by
specifying f in AC, rather than by specifying q.
Copy Group ID Copy group ID
Status Result of action specified in AC:
NOT LOADED: The copy group has not been loaded.
LOAD ERROR RC = xx
LOADED WITH WARNINGS RC = xx: The copy group has been loaded with
warning attached.
LOADED: The copy group has been loaded.
ESTABLISH ERRORS. YKMAKE RC = xx: making of a copy pair failed.
ESTABLISHED: making of a copy pair requested.
ESTABLISHED(HOLD): making of a copy pair with HOLD specified was
requested.
SUSPEND ERRORS. YKSUSPND RC = xx: suspending of a copy pair failed.
SUSPENDING: suspending of a copy pair requested.
RESYNC ERRORS. YKRESYNC RC = xx: synchronizing of a copy pair failed.
RESYNC PENDING: pending of the synchronizing of a copy pair requested.
QUERY ERRORS. YKQUERY RC = xx: acquiring a copy pair status failed.
QUERY ERRORS. YKEWAIT RC = xx: acquiring a copy pair status failed.
QUERIED SUCCESSFULLY: copy pair status was acquired.
DISSOLVE ERRORS. YKDELETE RC = xx: dissolving a copy pair failed.
PAIRS DISSOLVED: dissolving a copy pair requested.
EWAIT ERRORS. YKEWAIT RC = xx: monitoring volume status failed.
EWAIT GOTO(status
volume status.
RECOVER ERRORS. YKRECVER RC = xx: an attempt to dissolve the copy pair
from the secondary site has failed.
RECOVER SUCCESSFULLY: a request was made to dissolve the copy pair from
the secondary site.
Description A description of the copy group
1
An error occurs if an attempt is made to load a copy group definition file that was not created by Business Continuity
Manager.
2
The following list describes the differences between specifying q and f in AC:
◦
When f is specified, neither Approx. Matching % nor CTDelta is displayed on the Copy Group Status Summary panel.
◦
When f is specified, neither Match Rate% nor CT Delta DDD HH:MM:SS is displayed on the Copy Group Pair Status
panel.
◦
When f is specified, EXCTG registration error checking is not performed on copy groups for which EXCTG ID is
specified. If copy pair has not been registered or is being registered in EXCTG, the PENDING status is reported when
q is specified in AC, while DUPLEX status might be reported when f is specified in AC.
◦
When f is specified, the CAJ copy pair status at the time the BC copy pair is suspended is not checked for an BC
copy group for which a CAJ ATTIME suspend time has been set.
2, 3
4
: An error occurred during loading the copy group.
5
) SUCCESSFULLY: The volume has moved to the specified
Manage Copy Groups Panel (Copy Group Operation) 1 13