HP XP P9500 Reference Manual page 79

Table 48 Contents of the Copy Group Attributes Panel (continued)
Item
COPY PACE
PROT MODE
C/T TIME MODE
Description
when setting an ATTIME suspend
time.
NORMAL: Uses the NORMAL
ATTIME suspend function.
CAJ(STEADY): Uses the CAJ
ATTIME suspend function. The
suspension is activated in
STEADY mode.
CAJ(QUICK): Uses the CAJ
ATTIME suspend function. The
suspension is activated in QUICK
mode.
Specify the copy pace when making
a copy pair (YKMAKE command) or
resynchronizing a copy pair
(YKRESYNC command).
NORMAL: The speed of the copy
operation improves. However,
update I/O load on P-VOL is
high, and this might affect the
I/O performance of the host.
SLOW: Slows the speed of the
copy operation so that the effect
of the copy operation on the I/O
performance of the host is
minimal.
Specify the write-protect mode for
the S-VOL (required).
For BC, PERMIT is the default. For
CA and TCA, PROTECT is the
default.
PROTECT: Update of the S-VOL
is prohibited after a copy pair is
suspended (YKSUSPND
command is executed).
PERMIT: Update of the S-VOL is
allowed after a copy pair is
suspended (YKSUSPND
command is executed).
Specify the consistency time mode
to be used when the copy type is
CAJ.
JOURNAL: Uses the consistency
time committed to the restore
journal.
VOLUME: Uses the consistency
time committed to the S-VOL.
ASIS: Uses the consistency time
set according to the storage
system setting.
Discover/Define Configuration Panel (Configuration File Definition)
Copy type When effective
BC
When the YKMAKE
command is executed
CA
When the YKRESYNC
CAA
command is executed
BC When the YKSUSPND
command is executed
CA
CAA
CAJ
CAJ When the YKQUERY
command is executed
79