Sort Command - HP XP P9500 Reference Manual
Hp p9000 for business continuity manager software reference guide
Hide thumbs
Also See for XP P9500:
- Software user's manual (608 pages) ,
- Manual (348 pages) ,
- User manual (193 pages)
Advertisement
Table 1 SELECT Parameters (continued)
Parameter
action-name
Examples
To display the status of copy groups that begin with TCGRP (the default field name, CGID,
can be omitted), in the Manage Copy Groups panel, enter the following command:
SΔCGIDΔTCGRP*ΔQ
To load copy groups for which NOT LOADED is set to Status, in the Manage Copy Groups
panel, enter the following command:
SΔSTATUSΔNOT LOADEDΔL
To select the device for which VSN111 is set to Volser, in the Pair Selection List (Primary) panel,
enter the following command:
SΔVOLSERΔVSN111ΔS
To select the device for which F310 is set to Devn (the default field name, DEVN, can be
omitted), in the Pair Selection List (Primary) panel, enter the following command:
SΔDEVNΔF310ΔS
To select the devices for which F310 through F320 are set to Devn (the default field name,
DEVN, can be omitted), in the Pair Selection List (Primary) panel, enter the following command:
SΔDEVNΔ'F310':'F320'ΔS
To register a command device without specifying a value for Label (leaving Label blank) for
the storage system, enter the following command in the Route Status panel:
SΔLABELΔ'Δ'ΔB
NOTE:
If you specify three parameters, the command interpreter assumes that the field name is
specified. If you specify two parameters, the command interpreter assumes that the field name is
omitted.
SORT Command
Function
List items, displayed in a panel, are sorted by the SORT command based on the
specified field names. The sort order (ascending or descending) is defined for each
selected field.
12
ISPF Panels
Explanation
character-string*
*character-string
To specify a field value that contains spaces or commas (,), enclose the
specified field value in single quotation marks (').
If a value has not been specified for the VOLSER or LABEL field, specify
a space.
Asterisk (*)
Used to select all rows in a list.
'value- 1 ':'value-2'
Specifies a range of field values.
This pattern can be used only for DEVN, PDEVN, SDEVN, and VOLSER
fields. (VOLSER is in EBCDIC code order.)
Specify such that value- 1 ≤ value-2, and enclose the values in single
quotation marks (').
Specifies one of the available actions.
A space can be specified for action-name. If a space is specified, the
previously specified action is cancelled.
Advertisement
