HP XP P9500 Reference Manual page 365

Table 158 Processing for the Specified Startup Status (continued)
Specified startup status
Action Parameters
An action parameter specifies an action for the copy group.
Format
[STATUS=target-status,ACTION=action;[error-action;]]...
Information to be set
Specifies the target status, action, and error action for the copy group.
If the copy group is in the specified target status, the specified action will be executed. If the action
execution results in an error, the specified error action will be executed.
If you want to execute multiple actions, specify the parameters with the same target status in the
order you desire. An example is shown below:
STATUS=SUSPOP,ACTION=RESYNC(MYSI,0,'FORWARD');
STATUS=SUSPOP,ACTION=WAITFOR(MYSI,DUPLEX);
STATUS=SUSPOP,ACTION=SUSPEND(MYSI,'FORWARD');
STATUS=SUSPOP,ACTION=WAITFOR(MYSI,SUSPEND);
"Combinations of Target Statuses and Actions That Can Be Specified" (page 365)
combinations of target statuses and actions that can be specified.
Table 159 Combinations of Target Statuses and Actions That Can Be Specified
Target
status
NOP EXIT
Y Y
INVALID
Y Y
CONSLOST
Y Y
SUSPER
Y Y
NODELTA
Y Y
HOLDER
Y Y
SUSPCU
Y Y
SIMPLEX
Copy pair status
SUSPER
TRANS
HOLDTRNS
INVALID
SUSPVS
REVRSY
NODELTA
CONSLOST
HOLDER
REPORT WAITFOR RESYNC
Y N N
Y Y N
Y Y Y
Y Y Y
Y Y Y
Y Y Y
Y Y N
Processing
Executes the following commands:
YKRESYNC PREPARE
KEWAIT GOTO(HOLD)
Action
SUSPEND DELETE MAKE
N N N
N Y N
Y Y N
Y Y N
Y Y N
Y Y N
N Y Y
shows the
SENDMSG STOPPOINT PAUSE
Y Y Y
Y Y Y
Y Y Y
Y Y Y
Y Y Y
Y Y Y
Y Y Y
YKMONCG File 365