HP XP P9500 Reference Manual page 139

Table 75 Contents of the Volume Query Information (CA) Panel (continued)
Item
Dir
Pair Volume
1
It is not displayed when the YKQRYDEV command has been executed for the HP XP1024/XP128 Disk Array.
2
For details about the status of the displayed copy pair, see the table (for CA/CAA) that shows the copy pair statuses of
volumes obtained by using the YKQRYDEV command, in the HP P9000 for Business Continuity Manager Software Users
Guide. Note that when the device is a command device of either of the following models, CDEV(apid) is displayed in
the Status column (apid: APID):
HP XP12000/XP10000 Disk Array
HP XP24000/XP20000 Disk Array
HP P9500 Disk Array
3
If the emulation type of the journal volume is OPEN, JOURNAL is not displayed.
4
This value is invalid for CA copy pairs with the HyperSwap attribute.
5
The timing for when the defined values are reflected is as shown in
(page 75), in the table item of When effective.
6
It is displayed if P-VOL or S-VOL is shared with other copy pairs in the definition (for example, in a 1:n BC copy pair
configuration or when S-VOL for CAA is used as P-VOL for BC).
7
MISMATCH might be displayed. This happens when the device information during definition, as indicated by Primary
Volume and Secondary Volume, differs from the device information reported by the storage system. In this case, the
device information reported by the storage system is displayed in the Pair Volume column. If MISMATCH is displayed,
check the configuration file used, as well as the actual storage system configuration information and settings.
Description
SN
For Primary: storage system serial number
for the P-VOL of the copy pair specified in
the Copy Group Pair Status panel
For Secondary: storage system serial
number for the S-VOL of the copy pair
specified in the Copy Group Pair Status
panel
DEVN
For Primary: Device number for P-VOL of
the copy pair specified in the Copy Group
Pair Status panel
For Secondary: Device number for S-VOL
of the copy pair specified in the Copy
Group Pair Status panel
The following volume online information is
displayed to the right of DEVN:
*: Online
-: Offline
Nothing is displayed when volume online
information cannot be obtained.
Status Copy pair status
Copy direction in the copy pair
SN Storage system serial number of the volume
which makes a copy pair
SSID SSID for the volume which makes a copy pair
CU CU number of the volume which makes a copy
pair
CCA CCA of the volume which makes a copy pair
DEVN Device number of the volume which makes a
copy pair
"Contents of the Copy Group Attributes Panel"
Manage Copy Groups Panel (Copy Group Operation) 139
1
7, 2