HP XP P9500 Reference Manual page 366

Table 159 Combinations of Target Statuses and Actions That Can Be Specified (continued)
Target
status
Y
PENDING
Y
TRANS
Y
HOLDTRNS
Y
REVRSY
Y
SUSPVS
Y
SUSPOP
Y
HOLD
Y
SWAPPING
Y
DUPLEX
Legend
Y = This combination can be specified.
N = This combination cannot be specified.
Parameters
target-status
Specifies the status of the copy group on which the action is to be executed. For the specifiable
values, see "Combinations of Target Statuses and Actions That Can Be Specified" (page
For details on how the copy group status is determined when there are multiple copy pair statuses
in the copy group, see
action
Specifies the action to be executed if the copy group is in the target status. The copy group specified
in the YKMONCG file can be specified for the copy group ID in the ACTION parameter. This copy
group can be specified for copy group that has ACTIVE or INACTIVE status specified for
CGMONSTAT parameter.
"Values That Can Be Specified as Actions" (page 366)
specified as actions.
Table 160 Values That Can Be Specified as Actions
Specifiable value
NOP
EXIT(return-code)
REPORT(copy-group-ID
[,{SUMMARY|DETAIL|STATS|RPO}[,{CONS|ERROR|STATUS|INFO}]])
WAITFOR(copy-group-ID,
{DUPLEX|SUSPEND|SIMPLEX|SUSPVS|HOLD}[,timeout-value])
RESYNC(copy-group-ID,command-wait-time[,'command-parameter'])
SUSPEND(copy-group-ID[,'command-parameter'])
DELETE(copy-group-ID)
MAKE(copy-group-ID[,'command-parameter'])
366 BCM Monitor Parameter Files
Y Y Y
Y Y Y
Y Y Y
Y Y Y
Y Y Y
Y Y Y
Y Y Y
Y Y Y
Y Y Y
"When there are multiple copy pair statuses in a copy group" (page
Action
N N Y
N N N
N N Y
N N Y
Y Y Y
Y Y Y
Y Y Y
Y N N
Y Y Y
lists and describes the values that can be
Overview
Does nothing.
Stops BCM Monitor.
Outputs report information.
Executes the YKEWAIT command.
Executes the YKRESYNC command.
Executes the YKSUSPND command.
Executes the YKDELETE command.
Executes the YKMAKE command.
N Y Y
N Y Y
N Y Y
N Y Y
N Y Y
N Y Y
N Y Y
N Y Y
N Y Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
365).
369).