Path Set Selection List Panel - HP XP P9500 Reference Manual

Figure 44 Edit Route Entry Panel
In the selection field, specify a relevant value based on the status of the storage system whose
information is to be updated. How to specify the storage system varies depending on the value
specified in the selection field.
The following table describes the values to specify in the selection field and how to specify the
storage system.
Status of the storage
system
A Local Scan or
Remote Scan has
already been
performed.
A Remote Scan has
not yet been
performed.
Table 33 (page 55)
Table 33 Contents of the Edit Route Entry Panel
Item Description
DADID and DADID
serial
number of
the storage
system
SN

Path Set Selection List Panel

The Path Set Selection List panel displays a list of path set IDs when 3 Path Set Definitions is selected
in the Discover/Define Configuration panel.
Value to specify in How to specify the storage system whose information is to be updated
the selection field (DAD ID and serial number)
If you press the Enter key without specifying values for DADID and SN, a
1
list of selectable storage systems appears in the Storage System Selection
List panel. Select a storage system from the list.
If you specify a value for DADID or SN, a list of storage systems whose
DAD ID or serial number matches the specified value appear in the Storage
System Selection List panel. Select a storage system from the list.
Directly specify values for DADID and SN.
2
lists and describes the items in the Edit Route Entry panel.
Discover/Define Configuration Panel (Configuration File Definition)
Specify the DAD ID of the storage system to be
changed.
Specify the DAD ID so that the number of characters
in the disk configuration definition file does not
exceed 44 characters when combined with the
value specified for Configuration File Prefix (the
prefix) in the Set Defaults panel.
Specify the serial number of the storage system to
be changed.
55