Confirm Configuration File Update Panel - HP XP P9500 Reference Manual

Figure 138 Confirm Configuration File Delete Panel
Pressing the Enter key deletes the configuration file. Pressing the F12=Cancel key cancels the
deletion of the configuration file.

Confirm Configuration File Update Panel

When you attempt to update a configuration file for the following operations, the Confirm
Configuration File Delete panel is displayed asking you whether you want to perform the update:
When changing the copy group definition.
When changing a dummy device number in the disk configuration definition.
When changing the route list definition.
When changing the path set definition.
Figure 139 (page 175)
contents displayed in the panel vary depending on the definition to be changed.
Figure 139 Confirm Configuration File Update Panel
If you change the definition in the Copy Group Attributes panel and then press the Enter key, any
required attributes that were not entered in the Copy Group Attributes panel are displayed in a
Warning. When all required attributes have been specified, the Warning is not displayed.
If you have updated the copy group definition file, the disk configuration definition file, the route
list definition file, or the path set definition file, pressing the Enter key updates the file, and pressing
the F12=Cancel key displays the previous panel.
When you execute c in the Manage Path Set panel, pressing the Enter key updates the file, and
pressing the F12=Cancel key cancels the updating of the file. However, after an error occurred
shows an example of the Confirm Configuration File Update panel. The
Confirmation Panels 175