Ykdemo09 - HP XP P9500 Reference Manual
Hp p9000 for business continuity manager software reference guide
Hide thumbs
Also See for XP P9500:
- Software user's manual (608 pages) ,
- Manual (348 pages) ,
- User manual (193 pages)
Advertisement
* printErrorMessage: This procedure prints all of the error messages
*
in the Message structure when a CLI command failed.
*/
printErrorMessage: procedure expose DEMO_MSG.
do x = 1 to DEMO_MSG.0
say "Severity = " || DEMO_MSG.x.Severity
say "Text
say "Value
end
return 0
YKDEMO09
/* REXX
/**********************************************************************/
/*
/* All Rights Reserved. Copyright (C) 2009, 2010, Hitachi, Ltd.
/*
/**********************************************************************/
/*
/* YKDEMO09 - A sample demonstration script that illustrates
/*
how to use the Business Continuity Manager's CLI commands to
/*
perform fail-back operations in a 2DC configuration with
/*
HyperSwap and UR.
/*
This script can be used when DKC at the primary site has been
/*
stopped for a DKC maintenance or because a DKC failure has
/*
occurred.
/*
/*
This sample script assumes the following settings:
/*
/*
1) The definition files are stored in the dataset with the
/*
prefix "BCM.DEMO".
/*
2) The TC copy group's copy group ID is MYTCHS.
/*
3) The copy group ID between the primary and
/*
remote sites is MYUR1.
/*
4) The copy group ID between the local and
/*
remote sites is MYUR2.
/*
5) The route list ID is "DEMORLST".
/*
6) The primary Device Address Domain ID is "PRIM".
/*
/*
The details for this sample script are as follows:
/*
/*
*) When the cause of a HyperSwap is a DKC failure, execute this */
/*
sample script twice.
/*
When execution for a DKC maintenance or second execution for */
/*
a DKC failure, before using this sample script, change the
/*
status of the MYTCHS copy pair to Swapping that direction
/*
is the primary site to the secondary site.
/*
1) Call YKLOAD to load a configuration definitions.
/*
2) Check whether the cause of a HyperSwap was a DKC maintenance */
/*
or a failure.
/*
*) When first execution for a DKC failure, go to steps 3 and 4. */
/*
When execution for a DKC maintenance or second execution for */
/*
a DKC failure, go to steps 5 and 6.
/*
3) Delete the MYUR1 copy pair.
/*
4) Make the MYUR1 copy pair, exit this sample script, and then
/*
re-execute this sample script again.
/*
5) Suspend the MYUR2 copy pair.
/*
6) Execute a DeltaResync on the MYUR1 copy pair.
/*
*) After using this sample script, resync MYTCHS.
/*
/**********************************************************************/
/* Sample script begins. */
say "#-- BEGIN YKDEMO09."
address TSO "YKENV"
290 CLI Commands
= " || DEMO_MSG.x.Text
= " || DEMO_MSG.x.Value
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
*/
Advertisement
