Efficient Networks Router family Command Line Interface Manual page 74

Chapter 4: System Commands
Command
system name
system onewandialup
system passwd
system riptimer
system securemode list
system securemode set
system securemode set cli
system securemode set lan
system securemode set wan
system securitytimer
system selnat addpolicy
system selnat delpolicy
system selnat list
system snmpport
system sshport
system supporttrace
system syslogport
system telnetport
system wan2wanforwarding
Page 4-4
Table 4-1: System Command Listing (Cont.)
Sets or changes the name of the local router being
configured.
Can force the router to have no more than one re-
mote connection active at a time.
Sets the system authentication password for the
target router that is used when the router connects
to other routers or is challenged by them.
Sets the duration for RIP information to be ex-
changed with remote routers.
Displays the current secure mode configuration
values and the number of concurrent Telnet and
SSH sessions allowed.
Enables and disables the secure mode function.
Sets the number of concurrent Telnet and SSH
sessions the system will allow.
Allows discrete control of the secure mode for the
LAN interface.
Allows discrete control of the secure mode for the
WAN interface.
Allows the user to change the 10-minute default
security timer to another value.
Adds a Selective NAT policy.
Deletes a Selective NAT policy.
Lists the current Selective NAT policies.
Manages SNMP port access.
Manages SSH port access.
Provides the ability to capture all configuration data
to a file for troubleshooting.
Manages Syslog port access.
Manages the built-in Telnet server port access.
Allows management of WAN-to-WAN forwarding
of data from one WAN link to another.
Efficient Networks
Command Line Interface Guide
Function
Efficient Networks
®
Router family
®