Efficient Networks Router family Command Line Interface Manual page 493

®
Efficient Networks Router family
Command Line Interface Guide
Parameters
a
enable
disable
a
Default value
Response
A typical response is shown below.
-> ssh set keepalive enable
SSH Keepalive messages enabled.
ssh set mac
Sets the type(s) of message authentication code use for SSH connections.
Mgmt Class
Security (R/W)
Input Format
ssh set mac <md5 | sha1>
NOTE:
Multiple <types> are allowed on the command line .
Parameters
a
md5
sha1
a
Default value
Response
A typical response is shown below.
-> ssh set mac md5
SSH MAC List set to: hmac-md5
®
Efficient Networks
Keepalive messages are sent.
Keepalive messages are not sent.
Authentication using the Message Digest 5 algorithm.
Authentication using algorithm Secure Hash Algorithm-1.
Chapter 19: SSH Commands
Page 19-7