Efficient Networks Router family Command Line Interface Manual page 193

®
Efficient Networks Router family
Command Line Interface Guide
Command
remote setppppretrytimer
remote setprefer
remote setprotocol
remote setpvc
remote setrmtipaddr
remote setspeed
remote setsrcipaddr
remote settimer
remote start
remote stats
remote stop
remote unbindipvirtual-
route
®
Efficient Networks
Table 6-1: Remote Command Listing (Cont.)
Enables or disables the PPP retry timer for a remote
session.
Changes the interface for the remote entry.
Sets the link protocol for the remote router.
Specifies the PVC number for connecting to the remote
router.
Sets the WAN IP address for the remote router.
Specifies the speed to be used when dialing out using
the backup V.90 modem connected to the console port.
Sets the IP address for the target WAN connection to
the remote router.
Sets the length of the timeout period before disconnec-
tion.
If the remote is not currently active, this command at-
tempts to start an active session.
Shows the current status of the connection to the re-
mote router, including the bandwidth and data transfer
rate.
If the remote is active, this command stops the active
session.
Removes a remote route from the named IP virtual rout-
ing table.
Chapter 6: Remote Commands
Function
Page 6-5