Efficient Networks Router family Command Line Interface Manual page 61

®
Efficient Networks Router family
Command Line Interface Guide
Example
The following two commands trace the same route. The first specifies the domain
name; the second specifies the IP address.
-> traceroute www.yahoo.com
-> traceroute 204.71.200.68
Both commands send up to thirty packets with a wait period of one second and a
packet length of 56 bytes. The following is an example of the command output:
1: 172.17.20.122
2: 172.17.20.1
3: 12.39.98.136
4: 12.124.40.65
5: 12.123.13.166
6: 12.122.5.142
7: 12.122.5.253
8: 12.123.13.61
10: 206.132.150.250
11: 206.132.254.37
12: 206.178.103.62
13: reply from 204.71.200.68: bytes=56 (data), time=18 ms
traceroute: packets set 13, packets received 12
Example
For a faster route trace, specify the -n option to eliminate the domain name lookup.
-> traceroute -n
1: 172.17.20.122
2: 172.17.20.1
3: 12.39.98.136
4: 12.124.40.65
5: 12.123.13.166
6: 12.122.5.142
7: 12.122.5.253
8: 12.123.13.61
10: 206.132.150.250
11: 206.132.254.37
12: 206.178.103.62
13: reply from 204.71.200.68: bytes=56 (data), time=8 ms
traceroute: packets set 13, packets received 12
®
Efficient Networks
l2tp-router.flowpoint.com
checkpoint.flowpoint.com
csco2.efficient.com
gbr5-p56.sffca.ip.att.net
gbr3-p100.sffca.ip.att.net
gbr2-p60.sffca.ip.att.net
gar1-p370.sffca.ip.att.net
ge0-0-1000M.hr8.SNV.gblx.net
baslr-ge3-0-hr8.snv.yahoo.com
204.71.200.68
Chapter 2: Status Commands
Page 2-31