Efficient Networks Router family Command Line Interface Manual page 198

Chapter 6: Remote Commands
Examples
The first two addresses in the list represent subnetworks, the third is a class B
network, the fourth is a host, and the fifth address is the default route. The fifth
command adds the default route when the WAN interface is a point-to-point interface;
the sixth command adds the default route when the WAN interface is a broadcast
interface.
-> remote addIpRoute 10.1.210.64 255.255.255.192 1 HQ
remote addIpRoute 10.1.210.032 255.255.255.224 1 HQ
->
-> remote addIpRoute 172.17.0.0 255.255.0.0 2 HQ
remote addIpRoute 10.1.210.072 255.255.255.255 1 HQ
->
remote addIpRoute 0.0.0.0 0.0.0.0 1 HQ
->
remote addIproute 0.0.0.0 0.0.0.0 1 172.16.10.1 HQ
->
Response
Command prompt.
Page 6-10
®
Efficient Networks Router family
Command Line Interface Guide
Efficient Networks
®