Ike Ipsec Policies Set Dest; Ike Ipsec Policies Set Destport - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide

ike ipsec policies set dest

Defines a destination filtering parameter value for the policy. The destination
parameter requires that the data be intended for the specified destination IP address
and mask. The destination is the device or network that finally receives the packet,
not the router that routes the packet.
Mgmt Class
Security (R/W)
Input Format
ike ipsec policies set dest <ipaddress> <ipmask> <policyname>
Parameters
<ipaddress>
a
<ipmask>
<policyname>
a
Dotted-decimal notation
b
ASCII string
c
To see the policy names, use the
Example
-> ike ipsec policies set dest 192.168.16.0 255.255.255.0 mypolicy
Response
Command prompt.

ike ipsec policies set destport

Defines a destination port filtering parameter value for the policy. The destination port
parameter requires a specific destination port for the data or allows any destination
port (*). (Because port numbers are TCP and UDP specific, a port filter is effective
only when the protocol filter is TCP or UDP.)
Mgmt Class
Security (R/W)
Input Format
ike ipsec policies set destport <portnumber | telnet | http |
smtp | tftp | *>
®
Efficient Networks
a
IP address allowed to be the destination of the data.
IP network mask.
b
Name of the IPsec policy to which the destination parameter
c
value is added.
ike ipsec policies list
<policyname>
Chapter 12: IKE/IPsec Commands
command.
Page 12-11